ProLink Collars Set – Honda XL600V Transalp 1989–1999
Complete ProLink linkage collar set for the Honda XL600V Transalp 1989–1999.
Made from heat-treated, gas-nitrided and precision-ground 42CrMo4 steel to replace worn original components.
ProLink Collars Set for Honda XL600V Transalp
Complete replacement collar set for the rear suspension ProLink linkage of the Honda XL600V Transalp, model years 1989–1999.
Previous versions had different bushings without bearings.
The collars are designed to replace worn or damaged original components that are no longer available from Honda. Worn linkage collars can cause excessive play in the rear suspension, imprecise handling and accelerated wear of the bearings and seals.
The parts are manufactured from high-quality 42CrMo4 alloy steel. They are heat-treated, gas-nitrided to provide high surface hardness, excellent wear resistance and accurate fitment in the original suspension linkage.
Product features
- High-strength 42CrMo4 alloy steel
- Heat-treated to 800–950 MPa
- Gas-nitrided to a depth of 0.2–0.3 mm
- Surface hardness of 650–750 HV
- Precision-ground functional surfaces
- Direct replacement for the original linkage collars
- Made in Slovakia
Set contents
- 1× collar – Ø17.5 / Ø10 × 29.9 mm - pos.16_52464MN9000
- 1× collar – Ø17.5 / Ø12 × 58 mm - pos.17_52464MS6620
- 1× collar – Ø17.5 / Ø10 × 60 mm - pos.18_52464MS8000
- 1× collar – Ø17.5 / Ø10 × 90 mm - pos.20_52473MS8000
Dimensions are stated as:
outer diameter / inner diameter × total length
A matching ProLink bearing and seal set is also available for a complete refurbishment of the rear suspension linkage.
During installation, we recommend inspecting the bearings, seals, bolts and linkage components and replacing all worn or corroded parts.
Additional parameters
| Category: | TransAlp |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.4 kg |
Discussion
Be the first who will post an article to this item!
